Toshiba Hi-Speed ​​Port Replicator III Manual Del Usuario página 22

❖ USB issues
❖ Network issues
❖ Hardware issues
❖ Audio issues
Power issues
Problem
Docked computer will
not turn on (Your
computer's AC power
light does not turn on)
Docked computer
enters Resume mode
and shuts down
Docked computer
shuts down and its AC
power light is flashing
Solution(s)
Check the connections. Make sure the power
cord is firmly connected to the port replicator
and a live electrical power outlet.
Check the condition of the power cord and
plug prongs. If the cord is frayed or damaged
or the plug prongs are bent, replace the cord.
If the plug prongs are soiled, wipe them with a
clean cloth.
Disconnect and reconnect the AC adaptor
and try again to turn on the computer.
Check to make sure that the computer is
properly connected to the port replicator.
If the port replicator still does not power the
computer, contact Toshiba support. For
contact information, please see "If you need
further assistance" on page 26.
If the computer's internal temperature
becomes too high, the computer will
automatically enter Resume mode and shut
down. Leave the computer off until its interior
reaches room temperature.
If the computer has reached room
temperature and still does not start, or if it
starts but shuts down quickly, contact Toshiba
support. For contact information, please see
"If you need further assistance" on page 26.
Indicates a problem with the heat dispersal
system of the computer. Please contact
Toshiba support. For contact information,
please see "If you need further assistance" on
page 26.
Power issues
22