Configuring Audio Ports; Configuring Audio Playback Ports (Line Out) - Toshiba Hi-Speed ​​Port Replicator III Manual Del Usuario

To change the default settings, you may need to manually
adjust the audio settings in Windows
section.

Configuring audio playback ports (line out)

1 Right-click the speaker icon in the Notification Area of
your Windows
(Sample Image) Windows
2 Select
3 On the
playback device you want to configure.
4 Click
5 Click
6 Connect your playback device to the port you enabled in
step 3.
If your media player is running when you undock or dock,
you must close the application and wait approximately
10-15 seconds for the new settings to take effect before
restarting the application.
Audio devices connected to the port replicator via the 3.5
mm audio jacks will appear as USB Multimedia Audio
Devices in Windows
a USB port. This does not affect the operation of the
devices.
®
desktop.
If the speaker icon is not visible in the Notification Area,
access the audio configuration utility through the Start
menu as follows:
Start, Control Panel, Hardware
Click
Sound
and then
Playback Devices
Playback
Set Default
OK
.

Configuring audio ports

®
although they are not connected to
®
speaker icon
.
from the menu.
tab of the dialog box, select the
.
®
, as described in this
Sound
and
20
,