Bell & Ross BR 03-92 RED RADAR CERAMIC Guia De Inicio Rapido página 3

BR 03-92 RED RADAR CERAMIC
BR-CAL.302
Limited edition of 999 pieces
Movement : mechanical with automatic winding. BR-Cal.302. Power reserve approxi-
mately 40 hours. Functions : hours, minutes and seconds. Time-setting with hacking
function. Centre minute disc and outer hour disc marked with two red aircraft. Red
seconds hand. . 42 mm in diameter. Black ceramic. Red anti-reflective sapphire
Case
glass with hour and minute markers.
ultra-resilient synthetic fabric strap.
A
B
C
D
(x4)
STRAP MOUNTING
Attachments (E) with no visible screws
A spring bar is used to fit the strap to the case attach-
ments. This bar must be removed carefully using the
appropriate tool provided with the watch in the box.
IMPORTANT
* Quickset date setting. As with all watches with a date function, quickset date
setting (crown in position 1) MUST NOT UNDER ANY CIRCUMSTANCES be carried out
between the times of 9 P .M. (21:00) and 3 A.M. (03:00).
Water resistance.
Once the watch is set, to ensure perfect water resistance, push
the crown back to position 0. Never operate the crown underwater.
Note: The 4 slotted screws (D) mount the bezel to the case and ensure the water
resistance of the watch. To benefit from the Bell & Ross warranty, these screws must
never be unscrewed.
Water-resistant to 100 metres. Black rubber and
0 1
F
E
GENERAL USAGE
Starting the watch
movement by rotating the crown clockwise. After approximately 40 rotations,
the watch is fully wound (the winding mechanism does not have a stop to prevent
overwinding). The power reserve is approximately 40 hours when fully wound.
When the watch is worn , the automatic mechanism will wind the movement.
Setting the time
you to set the time to the nearest second. Set the time by rotating the crown in the
required direction.
A.
Minute hand
B.
Hour hand
2
C.
Second hand
D.
Case attachment screws (NEVER UNSCREW)
E.
Strap attachment
F.
Crown
0.
Hand wind the mechanism (clockwise)
1.
Neutral position or intermediate notch
2.
Set the hour (clockwise or opposite direction)
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off the watch
and strap with fresh water. It is also recommended to have the water resistance of
your watch checked every two years.
BELL & ROSS INTERNATIONAL WARRANTY
To benefit from your 2-year international warranty, your card must be activated at the
time of purchase by your approved Bell & Ross point of sale, and presented every time
an operation is performed. You can now access the digital version of this card and all
the information relating to your watch by scanning the QR code or visiting:
www.bellross.com/warranty.
To ensure a service that meets the brand's exacting standards, any servicing of your
watch must be carried out by the Bell & Ross service centre or a watchmaker approved
by Bell & Ross. The warranty does not, however, include:
. Any damage caused by accidents or by inappropriate or improper use of the watch
(e.g. violent impacts, crushing, rough handling of the clasp).
. Any damage caused by repair or disassembly operations carried out by a retailer or
after-sales service centre not approved by Bell & Ross.
. The consequences of the watch and bracelet/strap ageing and normal wear and tear.
3
. When the watch has stopped (crown in position 0): wind the
. Pull the crown out to position 2. The seconds hand will stop, enabling