4.- Leave a free space of at least 30 cm (12") for the frontal
empying area to allow correct, safe working.
5.- To prevent any injury or damage do not pull unit by power
cord.
1.- Locate the unit at the proper counter height, in an area that is
convenient for use. The location should be level to prevent
the unit or its contents from accidentally falling, and strong
enough to support the weight of the unit.
2.- Do not place anything on top of the blender with glass jug,
doing so could damage slicer or subject personnel to possible
injury.
3.- When setting up the unit for operation, make sure power to the
unit is off. Failure to do so could result in personal injury.
4.- Unit is not weatherproof. For safe and proper operation locate
the unit indoors where the
minimum of 70ºF (21ºC) and a maximum of 85ºF (29ºC).
5.- Do not locate the blender with glass jug in an area subject to
excessive temperature or grease from grills, fryers, etc.
Excessive temperature could cause damage to the unit.
6.- Do not place blender with glass jug in an area that restrict air
flow around the front or rear of the unit.
7.- Some exterior surfaces on the unit will get hot. Use caution
when touching these areas to avoid injury.
CAUTIONS
!
ambient air temperature is a
31