Motor Glass Shelves; Humidity-Controlled Crisper - Beko BBBF3019IMWESS Manual Del Usuario

Operating the Product
ATTENTION:
A
You must wait for the glass shelves
to reach room temperature before
immersing them in water for cleaning.
ATTENTION:
The door may not be closed if the
A
door shelves are positioned at the
same level as glass shelves. Make
sure than the door is closed after
placing the shelves.

5.23 Motor Glass Shelves

(May not be available in all models)
Having rear hangers, the electronic glass shelves
are adjusted with the buttons at the left side of the
control display through a motor. You can use these
buttons to move it up and down.
ATTENTION:
A
Since the glass shelves are controlled
electronically, please do not attempt to
adjust them manually.
A
ATTENTION:
The electronic shelf can bear 45 kg
maximum while moving.

5.24 Humidity-Controlled Crisper

(Crisper Compartment)
(May not be available in all models)
Thanks to its humidity control feature, it keeps the
humidity rates of fruits and vegetables at a certain
level and keeps foods fresh for a longer period.
To remove the crisper:
1. Pull the crisper until it stops.
2. Slightly lift the front section of the drawer and
take it out completely.
To install the crisper:
1. Pull the rails completely.
2. Place the gap at the rear corners of the
crisper to the detail located at the rear corners of
the rails.
3. Place the detail at the front section of the rail to
the gap at the front part of the crisper.
29 / 35 EN
Refrigerator / User Manual