Designated Use; Technical Data - Abicor Binzel SR Instructivo De Servicio

®
SR/ABITIG /ABITIG

1 Designated Use

2 Technical Data

Welding
Transport and storage
Relative humidity
Tab. 1
Ambient temperature
Type of voltage
DC polarity of the electrodes
Type of use
Voltage rating
Max. arc inflammability and stabilization voltage
Breakdown voltage 50 Hz
Protection type of the machine-side connections
Shielding gas
Electrode
Tab. 2 General torch data (EN 60 974-7)
Switching voltage of button
Switching current of button
Switching power of button
Breaking capacity of potentiometer
Tab. 3 Electrical control devices
®
GRIP
The TIG manual welding torches are used for safe welding of low- and high-
alloy materials. They consist of the torch neck with equipment parts and
wearing parts, handle and cable assembly with central connector. They
correspond to the directive EN 60 974-7 and are not considered to be devices
having their own functions. Arc welding can only be carried out in connection
with a welding power supply.
1 Designated Use
- 10 °C to + 40 °C
- 10 °C to + 55°C
up to 90 % at 20 °C
DC or AC
Usually negative
Hand-held
113 V peak value
10 kV
IP3X (EN 60 529)
as per DIN EN 439
Tungsten electrodes suitable for TIG
use, preferably low-radiation
0.02 - 42 V (DC and AC)
0.01 - 100 mA
max. 1 W (resistive load)
linear 1 W at 40 °C
EN - 3