Designated Use; Technical Data - Abicor Binzel PP Serie Manual De Instrucciones

PP

1 Designated Use

2 Technical Data

Ambient temperature of welding
Transport and storage
Relative humidity
Control device rating
Tab. 1 General Data
Type of voltage
Polarity of the electrode
Wire types
Type of use
Voltage rating
Protection type of the machine-side connections
Shielding gas (DIN EN 439)
Tab. 2 General torch data according to EN 60 974-7
Type Type of Load*
cooling
CO
PP
24D air 230
36D air 290
240D liquid 270
401D liquid 350
Tab. 3 Product-specific torch data as laid out in EN 60974-7 PP
The push-pull welding torches of the "PP" series guarantee constant and thus
problem-free wire feeding. This version is used predominantly for welding
aluminium, for thin wires and for long cable assemblies. They conform to EN
60 974-7 and are not considered devices having their own functions. Arc
welding can only be carried out in connection with a welding power supply.
These operating instructions only describe PP welding torches. PP welding
torches may only be operated using original ABICOR BINZEL spare parts.
ED Wire ø
M21
2
(A) (A) (%) (mm)
200 35 0,8 - 1,0 10 - 18
260 60 0,8 - 1,2 10 - 18
240 100 0,8 - 1,2 10 - 20
320 100 0,8 - 1,6 10 - 20
- 10 °C to + 40 °C
- 25 °C to + 55 °C
up to 90 % at 20 °C
1 A AC / 250 V AC
DC direct voltage
Usually positive
commercially available round wires
manual
113 V peak value
IP2X , IP3X (EN 60 529)
CO and mixed gas M21
2
Gas flow rate
Flow
temp.
max.
(l/min) (°C)
50
50
1 Designated Use
Cooling data
Flow Flow pressure
min. min. max.
(l/min) (bar) (bar)
1 2,0 3,5
1 2,0 3,5
EN - 3