Blender: chop ice and beat all kinds of fruits and vegetables.
1.- Open the large box. Take out all the packing material and the blender's protective cover and
its parts.
2.- Take out all the accessories and the instruction manual.
3.- Put the blender on a hard flat surface and avoid contact with excessively hot areas.
4.- If you have a sound enclosure box (R69295B):
a) Put the enclosure on a hard flat surface and avoid contact with excessively hot
surfaces. Open the lid of the enclosure and put the body of the blender inside. There
is a plug on the back of the enclosure that should be removed so the power cable
can pass through.
b) The enclosure may be set into a counter top. Be aware of the measurements that
appear below when preparing to install the enclosure:
5.- Make sure to clean all the parts that will come into contact with food using soapy water and
then dry them.
MAIN FUNCTION
INSTALLATION
25,5 cm
35