Main Function; Installation; Parts List - Lacor 69083 Instrucciones De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
2.- Do not place anything on top of the Electric blender; doing so could damage Electric blender
or subject personnel to possible injury.
3.- When setting up the unit for operation, make sure power to the unit is off. Failure to do so
could result in personal injury.
4.- To avoid damage to the unit or injury to personnel never use the blender without liquid in the
bowl.
5.- Unit is not weatherproof. For safe and proper operation locate the unit indoors where the
ambient air temperature is a minimum of 70ºF (21ºC) and a maximum of 85ºF (29ºC).
6.- Do not locate the Electric blender in an area subject to excessive temperature or grease
from grills, fryers, etc. Excessive temperature could cause damage to the unit.
7.- Do not place Electric blender in an area that restrict air flow around the front or rear of the
unit.
8.- Some exterior surfaces on the unit will get hot. Use caution when touching these areas to
avoid injury.
To beat, mix or knead products for preparing food.
UNPACKING
1.- Open the large box. Remove all packing materials and protective covering from the unit and
parts.

MAIN FUNCTION

INSTALLATION

7 5
3
2
1
9

PARTS LIST

4
8
10
6
1.- Turbo button
2.- Switch-speed selector
3.- Accessory removal control
4.- Motor unit
5.- Mixing rods
6.- Dough hook rods
7.- Stainless steel bowl
8.- Toggle stand
9.- Fastening button
10.- Toggle button
20

Publicidad

Tabla de contenido
loading

Tabla de contenido