Sony VPL-CS5 Manual De Instrucciones página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5 Lens protector (lens cover)
The lens protector automatically opens
when the power is turned on.
6 Front remote control detector
7 Ventilation holes (exhaust)
8 Connector/Control panel
For details, see "Connector Panel" and
"Control Panel" on page 12.
9 Rear remote control detector
0 Ventilation holes (intake)
qa Lamp cover
qs Powered tilt adjuster
qd Speaker
qf Security lock
Connects to an optional security cable
(Kensington's).
Web page address:
http://www.kensington.com/
qg Focus ring
Adjusts the picture focus.
qh Zoom ring
Adjusts the picture size.
qj Ventilation holes (intake)/air
filter cover
Notes
• Do not place anything near the
ventilation holes as it may cause
internal heat build-up.
• Do not place your hand or objects
near the ventilation holes as it may
cause the air coming out heat build-
up.
• To maintain optimal performance, clean
the air filter every 300 hours.
For details, see "Cleaning the Air
Filter" on page 37.
How to use the powered tilt
adjuster
To adjust the height
Adjust the height of the projector as follows:
1
Press the
I
/
1
key
The lens protector opens, and the
powered tilt adjuster rises automatically.
The adjuster stops at its previously
adjusted position.
2
Press
f
or
F
of the TILT key to adjust
the tilt of the projector.
You may press the KEYSTONE key on
the Remote Commander to display the
Tilt menu and adjust the tilt using the M/
m/</, keys.
to lower the
projector
TILT adjustment key
Notes
• Be careful not to let the projector down on
your fingers.
• Do not push hard on the top of the projector
with the powered tilt adjuster out.
It may be occurred malfunction.
Location and Function of Controls
Powered tilt
adjuster
to raise the
projector
TILT
11
GB

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Vpl-cx5

Tabla de contenido