Descargar Imprimir esta página

Troubleshooting & Faq - Jabra ARROW Manual Del Usuario

Ocultar thumbs Ver también para ARROW:

Publicidad

tRoUBLesHootInG & FAQ
I hear crackling noises
-
is a radio technology, which means it is sensitive to
objects between the headset and the connected device . It is
designed for the headset and the connected device to be used
within 33 feet (10 meters) of each other, with no major objects
in the way (walls, etc .) .
I cannot hear anything in my headset
- Increase the volume on your phone .
- Ensure that the headset is paired to the device that you wish
to use .
- Make sure your phone is connected to the headset by tapping
the answer/End button .
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone .
Follow the pairing instructions .
I am experiencing low battery standby time
- Turn off headset in between calls . Your headset will quickly and
automatically reconnect with your phone when powered on so
you do not miss a call .
- Make sure the headset is only paired with the devices you use
it with . Eg . if you get a new phone it is recommended that you
reset the headset before pairing it with the new phone (see
instructions below) .
I want to reset the headset
- It is possible to reset and test the headset by the following:
'Press and hold' the answer/end button while at the same time
turning the headset 'on' by sliding the on/off button to the 'on'
position . Continue to hold the answer/end button until the
light flashes 5 times . In this mode, the pairing list is reset, and
you can test if the headset works as you will be able to hear
audio in the speaker from the microphone .
- The next time you power on, the headset will go into pairing
mode as the first time you powered your Jabra arrOW on .
Jabra arrOW
8

Publicidad

loading