Before Using For The First Time - Bosch BSGL2 Serie Instrucciones De Uso

!
PLEASE NOTE
We therefore recommend that you only use our origi-
nal dust bags.
Your appliance is a highly efficient vacuum cleaner
that achieves excellent cleaning results when used
with high-quality dust bags. Only by using high-
quality dust bags (such as Bosch original dust bags)
can you ensure that your vacuum cleaner is working
at the energy efficiency class, dust pick-up rate and
dust retention capacity listed on its EU energy label.
The use of inferior-quality dust bags (e.g. paper
bags) can have a negative effect on the service life
and performance of your appliance. Using unsuitable
or inferior-quality dust bags can also damage your
vacuum cleaner. Such damage is not covered by our
guarantee.
You can find more information about this at
www.bosch-home.com/dust-bag. You can order our
original vacuum cleaner bags here.
B Textile filter (long-term filter) BBZ10TFG
Reusable filter with Velcro fastening.
C HEPA Filter BBZ8SF1
additional filter for pure exhaust air.
Recommended for those with allergies.
Replace every year.
D Micro active carbon filter BBZ8KF1
Combination of micro filter and active carbon filter.
Combats unpleasant odours over a long period.
Replace twice a year. Replace carbon filter frame with
micro filter frame.
Please note
It is not possible to combine a HEPA filter and a micro
active carbon filter.
E TURBO-UNIVERSAL ® -upholstery brush BBZ42TB
Simultaneously brush and vacuum upholstered furniture,
mattresses, car seats, etc..
Particularly suitable for vacuuming animal hair and fur.
The brush roller is driven by the suction force of the
vacuum cleaner.
No electrical connection required.
F TURBO-UNIVERSAL ® - floor brush BBZ102TBB
Simultaneously brush and vacuum short-pile carpets
and fitted carpets or any kind of covers. Particularly
suitable for vacuuming animal hair and fur. The brush
roller is driven by the suction force of the vacuum
cleaner.
No electrical connection required.
G Hard floor nozzle BBZ123HD
To vacuum smooth flooring (parquet, tiles, terracotta...).

Before using for the first time

Illustration 1*
Push the handle onto the flexible tube and until it
engages.
Starting up
Illustration 2
a) Lock the suction hose supports into the suction opening.
b) When removing the suction hose, press together both
latches and pull out the hose.
Illustration 3*
Connect the handle and the suction hose.
Illustration 4*
a) Connect the floor nozzle and the suction hose.
b) Connect the floor tool and the telescopic tube together.
Illustration 5*
a) Connect the suction hoses.
b) Unlock the telescopic pipe and adjust to the desired
length by moving the adjusting button / sliding sleeve in
the direction of the arrow.
Illustration 6
Take the mains cable by the plug and pull out the desired
length and then plug in to the mains socket.
Illustration 7
Switch on / off the vacuum cleaner by pressing the on /
off button in the direction of the arrow.
Illustration 8
Set the level of suction by turning the on / off button in
the direction of the arrow.
Suction
Illustration 9
Setting the floor nozzle:
fitted carpets and carpets
smooth floors
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
Illustration 10*
Vacuuming with accessories
(connect to the handle or the suction hose as required)
b) Corner nozzle
For vacuuming in corners and joins
c) Upholstery nozzle
For vacuuming upholstery, curtains etc.
e) Hard floor nozzle
For vacuuming hard floor surfaces (tiles, parquet etc.)
* Depending on model
37