Before Using For The First Time - Bosch BSG6 Serie Instrucciones De Uso

en de
Fold out picture pages.

Before using for the first time

1*
Figure
Push the handle onto the flexible tube and until it
engages.
2*
Figure
Push the crevice nozzle and upholstery nozzle back into
the accessories holder as indicated.
Setting up
3
Figure
a) Push the flexible hose adapter into the air intake opening
on the vacuum cleaner lid until it engages.
b) To remove the flexible hose, press the two lugs together
and pull the tube out.
4*
Figure
Push the handle into the suction pipe/telescopic tube.
To remove it, turn the handle slightly and pull it off the
tube.
5*
Figure
Insert the suction pipe/telescopic tube into the adapter of
the floor tool.
To remove it, turn the tube slightly and pull it out of the
floor tool.
6*
Figure
a) Connect the suction pipes together, or
b) Unlock the telescopic tube to adjust its length by moving
the sliding switch in the direction of the arrow.
7
Figure
Holding the power cord by the plug, pull out the required
length and plug it into the mains socket.
8
Figure
Press the on/off button in the direction of the arrow to
switch your vacuum cleaner on/off.
9
Figure
Adjust the suction by turning the on/off button in the
direction of the arrow.
8
All manuals and user guides at all-guides.com
Vacuuming
Figure
Figure
Adjust the "autofloor" floor tool:
If you are vacuuming varying types of floor coverings
(hard floors <-> carpets), we recommend that you use
the automatic setting so that the nozzle adjusts
automatically to the floor and you do not need to switch
over the nozzle setting.
Figure
Figure
a) Crevice nozzle for vacuuming crevices and corners, etc.
b) Upholstery nozzle for vacuuming upholstered furniture,
c) Hard furnishings brush
d) Hard-floor brush
Figure
Turbo brush
If your vacuum cleaner is equipped with a turbo brush,
please consult the accompanying instruction manual for
notes on use and maintenance.
Figure
* Depending on equipment
10
Adjusting the floor tool:
Rugs and carpets =>
Hard surfaces =>
11*
Hard floor setting =>
Fixed position for vacuuming hard
floors/ parquet
Automatic setting => auto
The nozzle adjusts automatically to the floor covering
and switches from hard floors/ parquet
to carpeted floors
Carpet setting =>
Fixed position for vacuuming rugs and carpets
12
Remove the upholstery nozzle and crevice nozzle from
the accessories holder as illustrated.
13*
Vacuuming with accessories
Attach the nozzles to the suction pipe or handle as
required:
curtains, etc.
For cleaning window frames, cabinets, mouldings, etc.
For vacuuming hard floor coverings (tiles, parquet
flooring, etc.)
14
After use, push the crevice nozzle and upholstery nozzle
back into the accessories holder as indicated.
15
When stopping cleaning for a moment, you can use the
parking aid on the back of the vacuum cleaner.
Once you have switched off the vacuum cleaner, slide
the catch on the floor tool into the groove on the rear of
the appliance.