Before Using For The First Time; When The Work Is Done - Bosch BSG4 Serie Instrucciones De Uso

en
Fold out picture pages.

Before using for the first time

Figure 1*
Push the handle onto the flexible tube and until it
engages.
Setting up
Figure 2
a) Push the hose connector into the opening on the vacuum
cleaner until it engages.
b) To remove the hose, press the two lugs together and pull
the hose out.
Figure 3*
Connect the handle and suction hose/telescopic tube
together.
Figure 4*
Connect the floor tool and suction hose/telescopic tube
together.
Figure 5*
a) Connect the suction hoses together.
b) Disconnect the telescopic tube and unlock it to adjust its
length by moving the sliding button/sliding sleeve in the
direction of the arrow.
Figure 6
Holding the power cord by the plug, pull out the required
length and plug it into the mains socket.
Figure 7
Press the on/off button in the direction of the arrow to
switch your vacuum cleaner on/off.
Figure 8*
a) Adjust the suction by turning the on/off button in the
direction of the arrow.
b) The suction can also be regulated by adjusting the air
flow regulator in the direction of the arrow.
Auxiliary air opening open
=> Suction is reduced
Auxiliary air opening closed
=> Maximum suction
All manuals and user guides at all-guides.com
Vacuuming
Figure 9
Figure 10*
a) Crevice nozzle for vacuuming crevices and corners, etc..
b) Upholstery nozzle for vacuuming upholstered furniture,
c) Mattress nozzle
d) Hard-floor brush
e) Hard furnishings brush
Figure 11
Figure 12

When the work is done

Figure 13
Figure 14
Adjusting the floor tool:
Rugs and carpets
hard floors
Vacuuming with accessories
(attach to handle or suction hose as required).
curtains, etc.
For vacuuming mattresses, upholstery, etc.
For vacuuming hard floor coverings (tiles, parquet
flooring, etc.)
For window frames, cabinets, profiles etc.
When stopping cleaning for a moment, you can use the
parking aid on the back of the vacuum cleaner.
Slide the catch on the floor tool into the groove at the
rear of the appliance.
The appliance can also be carried using the two handles
when vacuuming steps, for example.
Unplug the vacuum cleaner.
Tug the power cord briefly and let go. The cable then
rewinds automatically.
To store or transport the vacuum cleaner, use the storage
aid on the underside of the vacuum cleaner.
Stand the vacuum cleaner up on its end. Slide the catch
on the floor tool into the groove on the underside of the
appliance.
=>
=>
7