Safety Notes; Functions; General Notes - marklin TRIX Ce 6/8 III Serie Manual Del Usuario

Ocultar thumbs Ver también para TRIX Ce 6/8 III Serie:
Tabla de contenido

Publicidad

Safety Notes

• This locomotive is to be used only with an operating
system designed for it.
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one power pack.
• Pay close attention to the safety notes in the instructions
for your operating system.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• The feeder track must be equipped to prevent inter-
ference with radio and television reception, when the
locomotive is to be run in conventional operation. The
611 655 interference suppression set is to be used for this
purpose. The interference suppression set is not suitable
for digital operation.
• WARNING! Sharp edges and points required for operation.

General Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or
spare parts.
• http://www.maerklin.com/en/imprint.html
All manuals and user guides at all-guides.com

Functions

• This model is designed for operation with H0 2-rail
• Analog 14 volts DC, digital 22 volts AC.
• This locomotive is equipped with an eight-pole electrical
• Trix motor vehicles must not be operated on digital
No warranty or damage claims shall be accepted in those cases where parts
neither manufactured nor approved by Trix have been installed in Trix products or
where Trix products have been converted in such a way that the non-Trix parts or
the conversion were causal to the defects and/or damage arising. The burden of
presenting evidence and the burden of proof thereof, that the installation of non-Trix
parts or the conversion in or of Trix products was not causal to the defects and/
or damage arising, is borne by the person and/or company responsible for the
installation and/or conversion, or by the customer.
DC systems (track according to NEM standards) with
conventional DC power packs.
connection for retrofitting it with a digital decoder comp-
lying with NEM Standard 652.
systems without an built-in engine decoder (Motor can
be damaged!).
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

22776

Tabla de contenido