Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe Raindance 27471000 Modo De Empleo/Instrucciones De Montaje



Safety Notes

Gloves should be worn during installation to prevent

crushing and cutting injuries.
The shower system may only be used for bathing,

hygienic and body cleansing purposes.
Children as well as adults with physical, mental

and/or sensoric impairments must not use this
shower system without proper supervision. Persons
under the influence of alcohol or drugs are
prohibited from using this shower system.
Do not allow the streams of the shower touch

sensitive body parts (such as your eyes). An
adequate distance must be kept between the
shower and you.
The arm of the shower head is intended only to hold

the shower head. Do not load it down with other
objects!

Installation Instructions

• The fitting must be installed, flushed and tested after
the valid norms!
• Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting
joints or tiles sticking out), that the structure of the wall
is suitable for the installation of the product and has
no weak points. The enclosed screws and dowels
are only suitable for concrete. For another wall
constructions the manufacturer's indications of the
dowel manufacturer have to be taken into account.
• The filter insert must be use to protect the shower
against incoming dirt by pipework. Incoming dirt
leads to defects or/and can damage parts of the
shower; such caused faults voids all liability and
guarantee claims.

All manuals and user guides at all-guides.com
English
Wall mount see page 36
Ceiling mount see page 38

Technical Data

Operating pressure:
Recommended operating pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
27474000 / 27492000 / 27493000 /
27477000 / 27494000:
The shower can not used together with a continuous flow water
heater.

Symbol description

Do not use silicone containing acetic acid!
Dimensions (see page 31 - 35)
Flow diagram (see page 31 - 35)
Cleaning (see page 39 - 42) en-
closed brochure
Spare parts (see page 43)
Test certificate (see page 44)
max. 0,6 MPa
0,1 – 0,4 MPa
max. 60°C