Ce Declaration Of Conformity - FAAC 617 Manual De Instrucciones

IMPORTANT NOTES FOR THE INSTALLER
1. DESCRIPTION (Fig.1)
1.1. TECHNICAL SPECIFICATIONS
3. INSTALLING THE AUTOMATED SYSTEM
3.1. PRELIMINARY CHECKS
3.2. WALLING THE FOUNDATION PLATE
3.3. MECHANICAL INSTALLATION
4. START-UP
5. MANUAL OPERATION
6. RESTORING NORMAL OPERATION
7. MAINTENANCE
8. REPAIRS
9. AVAILABLE ACCESSORIES
9.1. SKIRT KIT
9.2. ARTICULATION KIT
9.3. END FOOT
9.4. FORK SUPPORT
9.5. BAR LIGHT KIT
9.6. BATTERY KIT
FAAC S.p.A.
Manufacturer:
Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALIA
Address:
Operator mod. 617
Declares that:
• is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive 2006/42/EC;
• conforms to the essential safety requirements of the following EEC directives:
• 2006/95/EC Low Voltage directive.
• 2004/108/EC Electromagnetic Compatibility directive.
• and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will become a
component has been identifi ed and declared as conforming to the conditions of Directive 2006/42/EEC and subsequent modifi cations.
Bologna, July 18 2014
th
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol
617

CE DECLARATION OF CONFORMITY

(DIRECTIVE 2006/42/EC)
CEO
A. Marcellan
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
draws your attention to the notes on the characteristics and operation of the product.
INDEX
5
page.6
page.6
page.6
page.6
page.6
page.6
page.6
page.7
page.7
page.7
page.8
page.8
page.8
page.8
page.8
page.8
page.8
page.8
page.8
532041 - Rev.B