Descargar Imprimir esta página

Using Your Appliance - Sinbo SMX 2750 Manual Del Usuario

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
All manuals and user guides at all-guides.com
7. During preparation, you can add ingredients through the opening the cover.
8. To stop the appliance, turn the knob (1) back to 0.
9. Place the appliance on a flat, clean and dry surface and then plug in your appliance.
CLEANING
1. Unplug the appliance.
2. Never immerse the motor until in water or put it under running water wipe it with a
soft dry or slight damp cloth.
3. For easier cleaning, quickly rinse the accessories after use. Completely dismantle the
mixer attachment. Handle the blades with care, as some have sharp cutting edges.
4. The grinding disc and the blade must be kept lubricated. Wipe them over with cooking
oil after each use.
5. If your accessories are discoloured by food (carrots, oranges etc), rub them gently
with kitchen towel dipped in cooking oil and then clean in the usual way.
6. Blender assembly: pour hot water with a few drops of washing up liquid into the blender
jug. Close the cover. Fit it on the appliance and give a few pulses. Remove the blender,
rinse the jug under running water and leave it upside down to dry .for cleaning more
difficult residues, especially with thicker preparations. The blade nut assembly can be
detached from the bottom of the jug, to do this, place the empty blender upside down on
a flat surface, release the blade /nut assembly with a quarter turn and lift out the seal
with care.
CAUTION: Don't wash the pasta attachment in the dishwasher, wipe clean with a damp
cloth do not immerse in water.
Accessory
Food
Whisk
Cream(include 38%fat) 250ml
Egg white
Dough hook
Flour
Salt
Yeast
Sugar
Water
Lard
Mixer blade
Flour
Castor sugar
Margarine
Egg

USING YOUR APPLIANCE

Maximum
Operation time
10minutes
12pcs
3minutes
1350g
10minutes
15g
20g
10g
936g
20g
100g
5minutes
100g
100g
2pcs
- 9 -
Speeds
Preparation
Min-Max
/
/
Min-Max
/
Min-Max
/

Publicidad

loading