Power Connection; Connecting The Water Hose To The Refrigerator; Connecting The Water Line To The Water Supply - Beko BFBF2715SS Manual Del Usuario

Installation

3.4. Power connection

A
WARNING:
sockets in power connection.
B
WARNING:
be replaced by Authorized Service.
C
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
Our firm will not assume responsibility for
any damages due to usage without earthing
and power connection in compliance with
national regulations.
The power cable plug must be easily
accessible after installation.
Do not use multi-group plug with or without
extension cable between the wall socket
and the refrigerator.
Hot Surface Warning!
Side walls of your product is equipped
with refrigerant pipes to improve the
cooling system. Refrigerant with high
A
temperatures may flow through these
areas, resulting in hot surfaces on the
side walls. This is normal and does
not need any servicing. Please pay
attention while touching these areas.
Refrigerator / User Guide
Do not use extension or multi
Damaged power cable must
3.5. Connecting the water
hose to the refrigerator
1. Slip the union (b) onto the water hose
(a).
2. Push the water hose downwards firmly
to slip it onto the water inlet valve (c).
3. Tighten the union (c) by hand to secure
it onto the water inlet valve.
C
Normally, you are not required to
tighten the union with a tool. However, you can
use a spanner or pliers to tighten the union if
there is a leakage
3.6. Connecting the water
line to the water supply
Connect the water line to a water supply valve.
If a valve is not present or you are not sure,
consult a qualified plumber.
9/23EN