Turning Off; Memory Mode - Braun Sensor Control Easy Click BP 3510 Manual Del Usuario

8
All manuals and user guides at all-guides.com
5. The position sensor icon shown on the left and a beep
confirm that you have reached the right measuring
position. The measurement will start automatically.
When the measurement is complete, a beep will sound
again, and the reading is displayed:
Upper (systolic) value
Lower (diastolic) value
Pulse
Please note: 15 seconds after switching on the appli-
ance, the measuring process will start automatically,
even if the appropriate measuring position has not been
reached.

Turning off

Press the on/off button to turn the product off. Otherwise
the product will turn off automatically after 2 minutes.

Memory mode

Your blood pressure monitor can store the readings of
50 measurements. Storing is done automatically after
each completed measurement. The memory is non-
volatile. This means that you will not loose stored data
when changing batteries.
The memory cannot be cleared. Once the memory is full,
the oldest values will be overwritten.
Recalling stored readings
To recall stored readings, first turn the product off,
then press the memory button (D).
A single push (m or n) will recall the latest reading.
The lower display line successively shows memory index
and pulse on the one hand and date and time of the
respective measurement on the other hand.