Using The Cd Player - Tascam CD-BT1MKII El Manual Del Propietario

Using the CD player

The CD player in CD-BT1MKII
works in much the same way as other
CD players, with a few minor differ-
ences and special features.
Playback
Press the PLAY/PAUSE key (
start playback and to pause playback.
Press the STOP key ( ) to stop play-
H
back.
Skipping between tracks and
searching within tracks
Use the skip/search keys (
and ) to move back and for-
//,
ward one track at a time.
Use these keys to search within the CD
by pressing and holding the key for
the direction that you want to search.
By continuing to press, the search will
speed up.
Looping (track/disc)
Press the LOOP key to repeat a single
track, or all tracks, according to the
item in the Setup menu.
16
— TASCAM CD-BT1MKII
All manuals and user guides at all-guides.com
Setting Repeat Mode
repeats a single current track.
SGL
LOOP 1
repeats the whole disc.
ALL
appears on the display.
) to
G/J
Looping (In/Out points)
To repeat a particular section of a track,
use the I/O
point of the loop, then use the
to set the end (OUT) point.
 Pressing the
back or paused playback sets the
m/.
IN point. The
the display.
 Pressing the
playback or paused playback sets
the OUT point.
on the display. The section between
the two points repeats seamlessly.
 To cancel an I/O loop, press the
LOOP
the display and the loop mode is
PLAY
canceled. Pressing the
again will restart the previously
determined loop.
appears on the display.
LOOP
key to set the start (IN)
I/O key
I/O key during play-
symbol blinks on
I-O
I/O key again during
and appear
LOOP I-O
key. disappears from
LOOP
LOOP key
 Pressing the I/O key again clears
the loop points.
The CUE key
The CUE key has two functions that
can be set in the Setup menu:
Setting Function
playback pauses at the point
CUE
where playback last started.
playback "flashes" automati-
FLS
cally back to the last point-
where playback started.
With a TASCAM RC-30P footswitch
(sold separately) connected, you can
use it instead of the CUE key for hands-
free operation. Set the
FOOT
Setup menu to or
CUE FLS
Display
In the home display mode press the
TIME/ESC key to change the time dis-
play between track elapsed time, track
remaining time, and total remaining
time of the CD.
item in the
(flash).