Equalizer - Tascam CD-BT1MKII El Manual Del Propietario

The CD-BT1MKII has a 5-band equal-
izer for bass guitar input and two EQ
slots (A and B) for the equalizer.
After an EQ slot is selected and you edit
the equalizer settings, the edited EQ
settings will automatically be stored in
the selected EQ slot.
Setting the equalizer
1. Tap the EQ/EDIT key to select ei-
ther EQ slot A or B (pressing the
EQ/EDIT key cycles through EQ
slot A, B, and OFF).
2. Press and hold the EQ/EDIT
to enter the EQ menu.
All manuals and user guides at all-guides.com
3. Select a parameter from the choic-
es below by pressing either the
PREV or NEXT
 (Lo : 80 Hz)
EQ L
 (Lo-Mid : 200 Hz)
EQLM
 (Mid : 500 Hz)
EQ M
 (Hi-Mid : 1.25 kHz)
EQHM
 (Treble : 3.15 kHz)
EQ H
 Mid Shape (EQ adjust
MID
ment) ON/OFF
4. When the selected parameter ap-
pears on the display, use either the
or
UP DOWN
key
level of gain. The available range
of values for adjustment is be-
tween -15 – +15.
5. Press the TIME/ESC
the EQ menu and return to the
home display mode. The param-
eters set in the
tomatically saved in the EQ slot
selected in step 1.
Recalling equalizer settings
Press the
key:
slot you want to recall.
TIP
If you have connected a footswitch such as
TASCAM RC-30P (sold separately), you can
step through the bank slots by pressing the
footswitch. Make sure that FOOT in the Setup
menu is set to EQ+.
key to adjust the
key to exit
EQ menu are au-

Equalizer

EQ/EDIT key to select the EQ
TASCAM CD-BT1MKII —
21