Kohler K-18486 Guia De Instalacion página 6

Arm
Small Setscrew
1. Assemble the Bath Filler - All Installations
NOTE: The arms included with the bath filler are NOT identical.
The screw hole on each arm should face toward the bath filler body.
Determine the left and right-side arms. The setscrew hole for each
arm should face the bath filler body.
Apply lubricant (provided) to the O-rings on the bath filler body.
Insert the short side of the arms into the bath filler body.
Secure each arm to the bath filler body with a large setscrew.
Orient the handshower bracket with the large side of the taper
facing up.
NOTE: The handshower bracket should be assembled perpendicular
to the arm to ensure the handshower hangs over the bath.
Slide the handshower bracket onto the arm for the hot water
supply, then secure with the small setscrews at the desired height
on the arm.
1054455-2-B
All manuals and user guides at all-guides.com
Arm
Bath Filler Body
Large Setscrew
Small Setscrew
Handshower Bracket (large side up)
6 Kohler Co.