Setting The Fm Tuning Step; Switching Auto Pi Seek; Switching The Warning Tone; Switching The Auxiliary Setting - Pioneer FH-P4000R Manual Del Usuario

Section
Initial Settings
11

Setting the FM tuning step

Normally the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA are on the tun-
ing step automatically changes to 100 kHz. It
may be preferable to set the tuning step to 50
kHz when AF is on.
1 Press
FUNCTION
Press
FUNCTION
appears in the display.
2 Select the FM tuning step with 2/3.
Pressing 2/3 will switch the FM tuning step
between 50 kHz and 100 kHz while AF or TA is
on. The selected FM tuning step will appear in
the display.
Note
• The tuning step remains at 50 kHz during
manual tuning.

Switching Auto PI Seek

The unit can automatically search for a different
station with the same programming, even dur-
ing preset recall.
1 Press
FUNCTION
Press
FUNCTION
in the display.
on or off with 5/∞.
2 Select
A-PI
Pressing 5/∞ will switch
off and that status will be displayed (e.g.,
).
A-PI :ON
50 En
All manuals and user guides at all-guides.com
to select .
FM STEP
repeatedly until
FM STEP
to select .
A-PI
repeatedly until appears
A-PI
between on and
A-PI

Switching the warning tone

If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press to select
FUNCTION
Press repeatedly until
FUNCTION
appears in the display.
on or off with 5/∞.
2 Select
WARN
Pressing 5/∞ will switch
and off and that status will be displayed (e.g.,
).
WARN :ON

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using external equipment connected to this
unit.
1 Press to select
FUNCTION
Press repeatedly until
FUNCTION
in the display.
on or off with 5/∞.
2 Select
AUX
Pressing 5/∞ will switch
off and that status will be displayed (e.g.,
).
AUX :ON
.
WARN
WARN
between on
WARN
.
AUX
appears
AUX
between on and
AUX