Main Technical Specifications; Specification; Worthy Information - Lacor 69352 Instrucciones De Uso Y Mantenimiento

MAIN TECHNICAL SPECIFICATIONS

MODEL:
VOLTAGE:
POWER:
PRESSURE:
PUMP CAPACITY:
SEAL LENGTH:
SEAL WIDTH:
BELL DIMENSIONS:
DIMENSIONS:
WEIGHT:
Warranty Information
This manual provides the installation, safety and operating instructions for the bell-shaped
Vacuum Machine. We recommend all installation, operating and safety instructions appearing in
this manual to be read before installation or operation.
The bell-shaped Vacuum Machine is a product of extensive research and field testing. The
materials used were selected for maximum durability, attractive appearance and optimum
performance. Every unit is thoroughly inspected and tested before shipment.
IMPORTANT! Keep these instructions for future reference.
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug the bell-shaped Vacuum Machine into a properly
grounded electrical outlet of the correct voltage, size, and plug
configuration. If the plug and receptacle do not match, contact
a qualified electrician to determine the proper voltage and
size, and install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit
from the power source and allow to cool before performing
any maintenance.
69352
220-240V/50Hz
350 W
0,9 bar
60L/min
30 cm
2,5 mm
(2 resistors sealing, each 2.5mm)
30,5x32,2x8 cm
42x38x27 cm
10 Kg

WORTHY INFORMATION

WARNING
!
43