GE Monogram ZDI15 Guía De Uso Y Cuidado página 20

Questions?
Use this
problem solver!
20
PROBLEM
ICEMAKER DOES NOT
OPERATE
ICE CUBES HAVE
ODOR/TASTE
ICEMAKER IS ON BUT
DOESN'T PRODUCE ICE
ICEMAKER IS ON BUT
PRODUCES LITTLE ICE
GRID IS NOT CUTTING
ICE SHEETS
The Problem Solver
POSSIBLE CAUSE
•
Power cord is not plugged into a live outlet.
•
The control is set at OFF.
•
The fuse is blown/circuit breaker is tripped. Replace fuse or
reset the breaker.
•
Room temperature is colder than normal. Room temperature
must be above 55˚ F (13˚ C). Otherwise, bin thermostat may
sense cold room temperature and shut off even though the bin
is not full of ice. Also, unit may not restart once it does shut off.
•
High mineral content in the water supply. Water may need to
be filtered or treated.
•
Food items stored in ice bin. Do not store any foods in the
ice bin.
•
Packaging materials were not removed. Make sure that all
packaging materials were removed at the time of installation.
•
Ice storage bin needs cleaning.
•
The control is set at OFF.
•
Water supply is not connected.
•
Condenser is dirty. Dirt or lint may be blocking the airflow
through the condenser. See Cleaning the Condenser.
•
Scale has built up in the icemaker. If there is white scale
buildup in the icemaker's water or freezing system, you should
clean the icemaker. See Care and Cleaning.
•
Room temperature is too hot. Room temperatures of more
than 90˚ F (32˚ C) will normally reduce ice production.
•
Condenser is dirty. Dirt or lint may be blocking the airflow
through the condenser. See Cleaning the Condenser.
•
Scale has built up in the icemaker. If there is white scale
buildup in the icemaker's water or freezing system, you should
clean the icemaker. See Care and Cleaning.
•
Cutter grid is not securely in place. Unplug the icemaker or
disconnect power. Remove the cutter grid cover and check the
cutter grid harness plug to make sure the connection is secure.
Icemaker