Sony VPL-PX40 Manual De Instrucciones página 15

Ocultar thumbs Ver también para VPL-PX40:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

d D KEYSTONE key
Corrects the trapezoidal distortion
caused by the projection angle. Use the
arrow keys (M/m/</,) to display the
image as a rectangle.
e HELP key
This function is not provided in this
projector.
f FREEZE key
This key freezes the projected image.
Press again to unfreeze the image.
g LASER key
Emits laser beam from the laser
transmitter when you press this key.
h Joy stick
Functions as a mouse of a computer
connected to the unit.
i Arrow keys (M/m/</,)
j R CLICK key
Functions as a right button on a mouse of
a computer connected to the unit.
k ENTER key
l FUNCTION 1/2/3 keys
This key does not work in the unit.
m Strap holder
Attaches the supplied strap.
n CONTROL S OUT jack (stereo
mini-jack)
Connects to the CONTROL S IN jack on
the projector with the connecting cable
(not supplied) when using the Remote
Commander as a wired one. In this case,
you do not need to install the batteries
since the power is supplied via the
CONTROL S IN jack on the projector.
o RESET/ESCAPE key
Functions as a RESET key.
p D ZOOM +/– key
Enlarges the image at a desired location
on the screen.
+: Pressing the + key once displays the
icon. This icon indicates the point you
want to enlarge. Use an arrow key (M/
m/</,) to move the icon to the
point to be enlarged. Press the + key
repeatedly until the image is enlarged
to your requirements.
–: Pressing the – key reduces an image
that has been enlarged with the D
ZOOM + key.
q L CLICK key
Functions as a left button on a mouse of
a computer connected to the unit.
r MENU/TAB key
Functions as a MENU key.
s APA (Auto Pixel Alignment) key
t VOLUME +/– keys
u LENS key
This function is not provided in this
projector.
v PJ/NETWORK (Projector/
Network) selector switch
Set this switch to PJ always.
w COMMAND ON/OFF switch
When this switch is set to OFF, no key
on the Remote Commander function.
This saves the battery power.
x Transmission indicator
Lights up when you press a key on the
Remote Commander.
This indicator does not light up when
you use the laser pointer.
y Infrared transmitter
z Laser transmitter
Location and Function of Controls
15
GB

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Vpl-px35

Tabla de contenido