Sony VPL-PX40 Manual De Instrucciones página 19

To connect an IBM PC/AT compatible computer
When you use a wireless mouse
Right side
CONTROL REMOTE CONTROL S VIDEO IN
ETHER RS-232C IN S VIDEO
(PLUS IN POWER)
INPUT A INPUT B
RGB AUDIO
INPUT D
R/R-Y/Pn G/Y B/B-Y/Ps SYNC/HD VD
USB cable (supplied)
(Connect the USB cable to use a
wireless mouse.)
Stereo audio connecting cable (not supplied)
HD D-sub 15-pin cable (supplied)
a) Use a no-resistance cable.
b) Connect a DVI cable to use a DVI equipment.
On the USB function
When connecting the projector to a computer by using the USB cable for the
first time, the computer recognizes the following devices automatically.
USB human interface device (wireless mouse function)
Recommended operating environment
When you use the USB function, connect your computer as illustrated above.
The USB mouse function can be used on a computer that came with Windows
98, Windows 98 SE, Windows ME, Windows 2000 or Windows XP
preinstalled models.
Notes
• Your computer may not start correctly when connected to the projector via the USB
cable. In this case, disconnect the USB cable, restart the computer, then connect the
computer to the projector using the USB cable.
• This projector is not guaranteed for suspend, standby mode. When you use the
projector in suspend, standby mode, disconnect the projector from the USB port on
the computer.
• Operations are not guaranteed for all the recommended computer environments.
VIDEO AUDIO
L R
(MONO)
INPUT C
RGB DVI-D
AUDIO
OUTPUT
AUDIO MONITOR AUDIO
DVI cable (not
To DVI-D
b)
supplied)
output
to USB connector
a)
to audio output
to monitor output
Connecting the Projector
Computer
19
GB