Sony VPL-PX40 Manual De Instrucciones página 51

Memory Preset signal
No.
1,280 × 1,024
34*
35
36*
37
38
1,600 × 1,200
39
43 480/60P
44 575/50P
45 1,080/50I
47 720/60P
48 720/50P
50 540/60P
1,400 × 1,050
52
* Digital input is supported for the signals marked with an asterisk. Those signals from No. 6 to No.
39 that are not marked with an asterisk are automatically output in accordance with the projector
specifications.
Notes
• Memory numbers 22 and 34 are interlace signals.
• When an SXGA+ signal is input, the image may extend beyond the edge of the
screen. In this event, input a signal in which the image is not surrounded by a black
area, and then unplug and then plug back in the connecting cable, or else press the
INPUT key and select the input signal again.
• Set the signal resolution and frequency of the connected computer so that they are
within the preset signal range.
fH (kHz) fV (Hz)
SXGA VESA 43 Hz 46.433
SGI-5 53.316
SXGA VESA 60 Hz 63.974
SXGA VESA 75 Hz 79.976
SXGA VESA 85 Hz 91.146
UXGA VESA 60 Hz 75.000
480/60P 31.470
(Double frequency
NTSC)
575/50P 31.250
(Double frequency
PAL)
1,080/50I 28.130
720/60P 45.000
720/50P 37.500
540/60P 33.750
SXGA+ 63.981
Sync
86.872 H-pos, V-pos
50.062 S on G
60.013 H-pos, V-pos
75.025 H-pos, V-pos
85.024 H-pos, V-pos
60.000
60.000 S on G
50.000 S on G
50.000
60.000
50.000
60.000
60.020 H-neg, V-neg
Specifications
SIZE
1,696
1,680
1,696
1,688
1,728
1,688
51
GB