Attaching The Stand To The Mounting Plate - Dell OptiPlex SX Systems Guía De Configuración Y De Referencia Rápida

Attaching the Stand to the Mounting Plate

7
NOTICE: When installing the computer in the hanging orientation, avoid
locations where it will be bumped by a user's legs or chair.
CAUTION: Attach the mounting plate to a solid surface capable of
supporting 40 lbs (18.1 kg) hanging weight.
mounting-plate slot
release-lever tab
Using the four #6 wood screws (0.625 inch; 15.88 mm) provided,
1
attach the mounting plate to a solid surface with a minimum thickness
of 1 inch (2.5 cm).
Orient the computer and stand under the mounting plate
2
approximately 1 inch (2.5 cm) from the edge of the mounting plate.
NOTICE: Make sure that you snap the release-lever tab securely into the
mounting-plate slot.
All manuals and user guides at all-guides.com
screw holes (4)
Setup and Quick Re ference Guide
solid surface with a
1-inch (2.5 cm)
minimum thickness
NOTE: Before attaching
the mounting plate to a
surface, first orient
yourself with how the
stand will attach to the
mounting plate.
19