Singing Machine iSM1020BT Manual De Instrucciones página 10

Connection
Connecting the Microphones and Headphones
Connecting the Pedestal Speaker
1
To protect the speakers, make sure the iSM1020BT is off and the MASTER VOLUME and
the MIC 1 and 2 VOLUME controls are set to minimum.
2
Connect the Pedestal Speaker plug to the Pedestal Speaker jack.
3
Turn the power on and slowly raise the MASTER VOLUME and the MIC 1 and 2 VOLUME
controls to a comfortable level.
All manuals and user guides at all-guides.com
9
Microphones:
Insert a microphone plug into the Mic 1
jack . Insert the other microphone plug
u
into the Mic 2 jack (if desired).
v
Note: Do not drop or tap the mic as
damage to the mic or speakers may occur.
Do not spin the microphone around for the
same reason.
Headphones:
For private listening, use headphones (not
included). Insert a headphone plug into the
Headphone jack . Disconnect when finished
w
so the included speakers can be used.
Pedestal Speaker
Jack