Speed Setting - Sinbo SHB 3076 Manual De Instrucciones

All manuals and user guides at all-guides.com
FEATURES
* Stainless steel long legs,
* Strong Steal Steel blade
* Variable Speed control
* DC motor, Low noise
* With 700ml big chopper, 700ml AS beaker
* AC230V, 50Hz, 750W

SPEED SETTING

When activating switch "b", the processing speed corresponds to the setting of the 3-Speed switch "a".
The higher the setting the faster the chopping results. Press "b" first, then adjust "a". Press the switch
"c",The speed is the fastest.
Depending on the application we recommend the following speed settings:
Chopper 2~3
Hand blender 2~3
For beaker blending
• Don't fill the beaker above 700ml.
For saucepan blending
•Take the pan off the heat and let it cool slightly. Otherwise your hand blender could overheat.
• Don't let liquid get above the join between the power handle and blender shaft.
• Move the blade through the food and use a stabbing action.
• If your blender gets blocked, unplug before cleaning.
1. Fit the power handle inside the blender shaft, turn and lock.
2. Plug in. To avoid splashing, place the blade in the food before switching on.
3. Hold the power handle steady. Then press the button.
4. After use, unplug and dismantle
TO USE THE CHOPPER
* Rating time: Short time operation 2 minute.
• You can chop meat, cheese, vegetables, Celery, bread, biscuits and nuts.
• Don't chop hard foods such as coffee heats, ice cubes, spices or chocolate - you'll damage the blade.
1. Remove any bones and cut food into 1-2cm cubes.
2. Fit the chopper blade over the pin in the bowl. j
3. Add your food
4. Fit the chopper cover, turn and lock. h
5. Fit the power handle, turn and lock. d
6. Plug in, hold the bowl steady, and then press on/off button.
7. After use, unplug and dismantle.
TO USE THE HAND BLENDER
* Rating time: Short time operation 2 minute.
* You can blend baby food, soups, sauces, milk shakes and mayonnaise.
* Take the pan off the heat and let it cool slightly. Otherwise your hand blender could overheat.
* Don't let liquid get above the join between the power handle and blender shaft.
* Move the blade through the food and use a stabbing action.
* If your blender gets blocked, unplug before cleaning.
- 7 -