Tabla de contenido
Publicidad
Sound Controller 5 (Controller number 74)
Status
2nd byte
BnH
4AH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0, 127)
* When the [COLOR] knob is turned, the corresponding value will be transmitted.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted only when the HPD-15 is in play for pattern in which this message is recorded.
Sound Controller 7 (Controller number 76)
Status
2nd byte
BnH
4CH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0, 127)
* When the [LFO RATE] knob is turned, the corresponding value will be transmitted.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted only when the HPD-15 is in play for pattern in which this message is recorded.
General Purpose Controller 6 (Controller number 81)
Status
2nd byte
BnH
51H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0, 127)
* The HPD-15 tramsmits a value corresponding to the position of the d beam controller.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted only when the HPD-15 is in play for pattern in which this message is recorded.
General Purpose Controller 7 (Controller number 82)
Status
2nd byte
BnH
52H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0, 127)
* The HPD-15 tramsmits a value corresponding to the position of the ribbon controller L.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted only when the HPD-15 is in play for pattern in which this message is recorded.
General Purpose Controller 8 (Controller number 83)
Status
2nd byte
BnH
53H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0, 127)
* The HPD-15 tramsmits a value corresponding to the position of the ribbon controller R.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted only when the HPD-15 is in play for pattern in which this message is recorded.
Effect 1 (Reverb Send Level) (Controller number 91)
Status
2nd byte
BnH
5BH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0 - 127)
* When a pattern is selected, the part reverb send level of the sequencer pattern data will
be transmitted.
* This is transmitted only on the channel which is assigned to the melody parts and the
percussion parts.
Effect 2 (Tremolo Depth) (Controller number 92)
Status
2nd byte
BnH
5CH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0 - 127)
* When the [LFO FLT/AMP] knob is turned, the corresponding value will be transmitted.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted only when the HPD-15 is in play for pattern in which this message is recorded.
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
Effect 4 (Celeste Depth) (Controller number 94)
Status
2nd byte
BnH
5DH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H, 7FH (0, 127)
* This message is transmitted with the value 7FH when turned on the [MULTI EFFECTS]
button or value 00H when turned off.
* When a pattern is selected, the part M-FX of the sequencer pattern data will be
transmitted.
* Transmitted only when the HPD-15 is in play for pattern in which this message is
recorded.
RPN MSB/LSB (Controller number 101,100)
Status
2nd byte
BnH
65H
BnH
64H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
mm = upper byte of parameter number specified by RPN (MSB)
ll = lower byte of parameter number specified by RPN (LSB)
* Only the channel assigned to the melody parts are sent.
* When a pattern is selected, the pitch bend sensitivity of the sequencer pattern data will
be transmitted.
* Regarding the RPN please refer to Page 93.
Values for the RPN parameter, on the normal mode of HPD-15, are as follows. Regarding
the value of each parameter, refer to Data Entry (Controller number 6).
RPN
mm ll
Parameter
00H 00H
Pitch Bend Sensitivity
7FH 7FH
RPN null
Cambio de Programa
Status
2nd byte
CnH
ppH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
pp = Program number:
00H - 7FH (prog.1 - prog.128) preset patch
00H - 4FH (prog.1 - prog.80) user patch
00H - 35H (prog.1 - prog.54) melody part's instrument
* Program changes corresponding to patch are sent when patch is selected.
* Program changes corresponding to each part's instrument are sent when pattern is
selected. Also, when instruments are selected for parts, program changes for the
respective instruments are sent.
Cambio de Pitch Bend
Status
2nd byte
EnH
llH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
mm,ll = Pitch Bend value:
00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)
* When the [PITCH] knob is turned, the corresponding value will be transmitted.
* Transmitted only when the HPD-15 is in play for pattern in which this message is
recorded.
Mensaje a Tiempo Real del Sistema
Reloj de Temporización
Status
F8H
Inicio
Status
FAH
Continuación
Status
FBH
Implementación MIDI
3rd byte
vvH
3rd byte
mmH
llH
3rd byte
mmH
97
Publicidad
Capítulos
Tabla de contenido
