IMPORTANT INFORMATION CONCERNING THE APPLIANCE AND INSTRUCTIONS
In this manual you will find all of the important information concerning the preparation, use and maintenance of your
machine.
Read the instructions carefully before using your appliance for the first time and keep them for future reference: KRUPS
may not be held liable in the event of any use that does not comply with the instructions.
GUIDE TO THE SYMBOLS USED IN THE INSTRUCTIONS
Warning: Risk of serious injury or death. The lightning bolt symbol warns against electrical dangers.
Warning: Risk of possible malfunction, damage, or destruction of the appliance.
!
Warning: General or important note concerning the operation of the appliance.
Products supplied with your machine
Check the products supplied with your machine. If any parts are missing, contact your hotline (see p. 22: Initial settings).
Parts supplied:
- Espresso Automatic Series EA89
- 2 cleaning tablets
- 1 descaling sachet
- Milk conduit adaptable to the "One Touch Cappuccino" block
- Dismantling key for cleaning the steam circuit
- Safety instructions booklet
- Claris – Aqua Filter System cartridge with fitting accessory
- 1 stick for testing water hardness
- Instructions
- List of approved Krups service centres
- Guarantee documents
TECHNICAL DATA
Appliance
Power supply
Pump pressure
Coffee bean container
Power consumption
Standby power consumption
Water tank
First use and storage
Dimensions (mm) H x L x D
Weight EA89 (kg)
Frequency of the Bluetooth module
Output produced by the Bluetooth module
Subject to technical adaptations.
20
Espresso Automatic Series EA89
220-240V~ / 50 Hz
15 bars
250 g
During operation: 1,450 W
Connected mode: 0,72 W
2.3 l
Indoors, in a dry place (protected from frost).
367 x 240 x 380
8.4
2.40 MHz
7.7dBm
APPLIANCE DESCRIPTION
A
Water tank handle/lid
B
Water tank
C
Coffee grounds collector
D
Height-adjustable coffee outlets
E
Grid and removable drip tray
F
Coffee bean container lid
G
One Touch Cappuccino removable block
G1
Dismantling key for cleaning the steam
circuit
G2
One touch cappuccino block
H
Milk tube and connector
I
Water level float.
Specific information about:
The drip tray: it allows you to collect water or coffee that might flow out of the appliance during and after preparation.
It is important to always leave it in place and to empty it regularly.
!
Important : Read these instructions carefully and keep them for future reference. Please follow the safety guidelines.
Manufacturer:
SAS GSM
Rue Saint-Léonard F-53104 Mayenne
France
OVERALL VIEW
Presentation of the different buttons
Button
Description / General functions
Switching the machine on and off.
It is necessary to press and hold the button to start the machine.
Allows you to return to the previous screen or stop a recipe in progress.
Browse upwards in the menu / increment the parameter selected
Browse downwards in the menu / decrement the parameter selected
Confirmation of selection.
Function for increasing the strength of the coffee.
Function for adding a strong espresso to the recipe selected.
Accessible with the main recipes (espresso, long coffee, cappuccino, Macchiato, tea) according
to model.
Starts preparing an espresso.
Starts preparing a Coffee.
1
Coffee bean container
J
Grinding fineness adjustment dial
K
Cleaning tablet funnel
L
Metal grinding mill
2
Display panel
M
Display
N
"On-off" button
O
Tactile buttons
21