Pack Contains; Installing Batteries; Mounting Of Thermostat - Cordivari RF Manual De Uso

English

1. Pack contains

Screw Anchor
x2
AA Batteries
(LR6)
x2

1.1 Installing batteries

1. Remove the batterie cover which is placed on the front of the
thermostat.
2. Insert the 2 AA batteries supplied. Note the correct polarity according
to the engraving on the thermostat when inserting the batteries.
3. Replace the batterie cover.
User manual

1.2 Mounting of thermostat

• On the wall
Screw for base
attaching
1. Unscrew the 2 screws under the
x2
thermostat.
Thermostat table
stand
x1
3. Secure the wall plate with the two
screws provided using the horizontal
and vertical holes.
5. Secure the thermostat by
screwing the locking screws under
the thermostat.
• On the table stand
1. Insert the 2 pins inside the
wallplate.
- 24 -
2. Remove the wallplate from
the thermostat.
x2
4. Replace the thermostat on
the wallplate.
x2
2. Slide the stand to the right.
Cod. 1910000000274 - nv01