Operating; Power On /Standby Mode; Selecting The Operating Mode - Cordivari RF Manual De Uso

English
2. The remot is in pairing mode. Then proceed to the device control
pairing (refer to its installing and using instruction manual).
3. When both device and remote control are linked, the
appears and is constantly displayed. The device returns automatically
to the frost protection mode.
• Check the RF signal strengh (only if paired)
You can check at any time the RF transmission performace between hte
device and the remote control.
To view the RF reception level, from Frost protection mode, press
for 5 seconds. Then the level appears on the dispaly.
0 = High RF transmission level, the location of the remote control
is optimized.
9 = Low RF transmission level:
To improve the RF transmission performance between the 2 devices and
ensure the remote management is optimized:
- Please ensure the RF transmission is not interrupted, move the remote
control.
- Move the remote control closer to the device.
• RF pairing cancellation
You can cancel at any time the RF transmission between the device and
the remote control.
From frost protection mode press simultaneosuly
seconds.
symbol
Level of the remote
control
Level of the connected
devide
and for 5
- 26 -
The symbol disappear from the display, the remote control and the
device are not associated anymore.

3. Operating

Before carrying ot any setting procedures, ensure that the keypa is
indeed unlocked.
3.1 Power on / Standby mode
When the device is on standby mode, 2 lines appear on the remote control
display. To exit standby mode, press the standby button (refer to the device's
instruction manual).
3.2 Selecting the operation mode
The button allows you to adapt the operating schedule of your device
to your needs, depending on the season, whether your home is occupied or
not. By pressing the button once or several times, select the required
mode.
Mode sequence:
→
Auto Comfort
Mode overview
• Auto mode
In Automatic Mode, the device will automatically change from Comfort
mode to Eco mode according to the established programme.
2 diff erent cases depending on your set-up:
1. 7 day and daily programme
Your device has been programmed and is executing Comfort and Eco
mode orders in line with the settings and time periods you have selected
(see "7 day and daily programme integrated" chapter).
→ →
Frost
Eco
protection
Cod. 1910000000274 - nv01