Restoring Factory Settings (Only If Pin Code Is Desabled); Expert Settings; Access - Cordivari RF Manual De Uso

English
4- Press again on to exit setting PIN code mode and go back to the
home display of the installer settings.
To exit the installer setting, press

5.5 Restoring factory settings (only if PIN code is desabled)

If the PIN code protection is disabled, the user and installer settings are
reinitialized:
1- From the PIN code setting, press
display.
2- no appears . Press or
YES = Factory settings reset.
no = Factory settings not reset.
3- Press the key for 5 seconds. The device returns to its initial
confi guration and goes back automatically tothe home display of the
installer settings.
twice.
. rEST appears briefl y on the
to select YES.
The following factory values will be eff ective:
Settings
Comfort setting temperature
Boost duration
Keypad lock
User settings
Eco mode temperature lowering level
Frost protection temperature
Super Comfort
Minimum set of Comfort setting
temperature
Maximum set of Comfort setting
temperature
Maximal Boost duration
Maximum ambient temperature
for the automatic stop of the Boost
Installer settings
Automatic open window
detection
Occupancy detection
Dual optimization feature
Presence / absence sensor
PIN code protection
PIN code
To exit the user setting, press

6. Expert settings

6.1 Access

To access the expert settings in 4 steps. From Auto, Comfort, Eco or
Frost protection mode:
1- Press for 5 seconds.
- 38 -
Factory settings
Operation
19°C
60 min.
Disabled
60 min.
-3,5°C
7°C
Enabled
7°C
30°C
60 min.
35°C
7°C
Enabled
Enabled
Opti Comfort
Enabled
Disabled
0000
twice.
Cod. 1910000000274 - nv01