Controls And Display; Rf Pairing And Management - Cordivari RF Manual De Uso

3. Fold the stand and lock it into
the wallplate.
4. Tilt the thermostat according to its placement in the room. 2 tilts are
available.
30°

2. Controls and display

• Thermostat buttons overview
1
2
3
1. Batteries compartment.
2. Selecting operating modes.
3. Plus and minus buttons, used to set temperatures, time, date and pro-
grammes.
4. Save settings.
5. Boost button.
6. Rotary dial
7. LCD display
Cod. 1910000000274 - nv01
37°
7
6
5
4
• LCD display (Indicators overview)
1
2
3
4
5
6
1. Temperature setpoint/information.
2. Gauge consumption
3. Measured ambient temperature
4. Boost indicator light.
5. Open window detection indicator.
6. Keypad locked
7. Days of the week (1=monday ... 7= sunday)
8. Operating modes auto :
mode - Frost protection mode -
Programming mode -
9. Heating/cooling indicator
10. Low battery indicator
11. Occupancy detection indicator
12. Radio trasmission indicator
13. Min/Max value indicator
Important: In Auto, Comfort, Eco and Standby mode, backlight turns
off automatically after 4 seconds if no buttons are pressed. It will be
necessary to reactivate it by pressing one of the keypad buttons before
making settings.

2.1 RF pairing and management

• RF pairing between the remote control and the device
The remote control and the devide are not paired together at the factory,
then proceed ad follow:
1. From frost protection mode, press
pairing process, press any button.
- 25 -
English
8
9
10
11
12
7 13
Auto mode - Comfort mode -
Time and date setting mode -
Settings
for 5 seconds. To cancel the
Eco