Cordivari RF Manual De Uso página 37

By default registered PIN code is 0000.
Press or to select 0. Save by pressing
2- For others numbers, select 0 by press
press on again to save and exit.
The PIN code is initialized, the next setting appears: PIN code activation.
• Activation/deactivation of the PIN code
1- OFF appears on the display.
Press or to enabled PIN code.
ON appears on the display.
ON = PIN code enabled
OFF = PIN code disabled
2- Press to save and return to the home installer settings display.
Cod. 1910000000274 - nv01
The PIN code is enabled. Any modifi cation of reserved settings listed in
. "Overview" is now impossible.
• Customizing the PIN code
If you have just activated the PIN code, follow the steps described below.
Alternatively, you must copy the steps 1 and 2 of the initialisation process
as well as the steps 1 and 2 of the activation process before personalising
the PIN code.
1- When On appears, press
. When 0000 appears,
2- The 0000 code appears and the fi rst number blinks. Press
exit. Repeat this operation for the remaining 3 numbers.
3- Press
- 37 -
for at least 5 seconds.
, to select the fi rst desired number then press
to confi rm. The new code is now saved.
English
or
to save and