Finishing The Installation - Kichler ARVADA Manual Del Usuario

FINISHING THE INSTALLATION

Step 1. Remove the two screws and loosen the two screws on the hanger bracket.
Step 2. Install the canopy to the hanger bracket by aligning the key holes in the fan housing with the two screws in the
hanger bracket, then lifting the canopy up and turning clockwise. (Fig. 24)
Step 3. Re-tighten the two screws and re-install the two screws. Tighten all screws securely.
Step 4. Push the canopy decorative ring to the top of canopy (Fig.25)
Canopy
Hanger bracket
Screws
Canopy
decorative ring
Fig. 24
Canopy
Canopy
decorative ring
Fig. 25