Finishing The Installation - Kichler PINION 60 Manual De Instrucciones

FINISHING THE INSTALLATION

NOTE: Before continuing installation, confirm that the power is still turned o at
the main circuit breaker or by removing the correct fuse. Turning the power o
using a wall switch is not su cient to prevent electrical stock.
Step 1. Assemble canopy by rotating key slot in canopy over shoulder screw
in mounting bracket. (Fig. 17)
Step 2. Reinstall the shoulder screw that was previously removed on Page 8
step 2, then retighten two shoulder screws securely.(Fig.18)
Step 3. Securely attach and tighten the canopy hole cover over the shoulder
screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig. 19)
12
Canopy
Screw
Canopy
Fig. 18
Canopy
Canopy Hole Cover
Fig. 17
Fig. 19