Candy CEHDD30TCT Manual De Instrucciones página 10

Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
Using your Ceramic Hob
To start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show
" – " or " – – ", indicating that the induction hob has entered
the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control, and
a indicator next to the key will flash.
4. Set a power level by touching the "-" or "+" control.
• If you don't choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at step 1.
• You can modify the heat setting at any time
during cooking.
5. When zone 1 is working, touch the heating zone selection
control then activate double zone by pressing
When double zone is working, touch the heating zone selection control then
turning off the double zone by pressing
.
.
EN-9