Locking The Controls - Candy CEHDD30TCT Manual De Instrucciones

When you have finished cooking
1. Touching the heating zone selection control that you
wish to switch off.
2. Turn the cooking zone off by touching the "-" and scrolling down to "0", or
holding the "+" and "-" button at the same time for 1 second, it will cut down to "0"
directly.
Make sure the power display shows "0", then shows "H".
3. Turn the whole cooktop off by touching the "ON/OFF" control.
4. Beware of hot surfaces
"H" will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an energy
saving function if you want to heat further pans, use the hotplate that is still hot.

Locking the Controls

• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
To lock the controls
Touch the keylock control. The timer indicator will show "Lo".
To unlock the controls
1. Make sure the ceramic hob is turned on.
2. Touch and hold the keylock control for a while.
3. You can now start using your ceramic hob.
When the hob is in the lock mode, all the controls are disable except the
ON/OFF
control in an emergency, but you shall unlock the hob first in the next
Operation
and then
,
you can always turn the ceramic hob off with the ON/OFF
EN-10