Control And Display; Operation - ADE M112800 Manual De Operación

Control
Keys
ON / OFF
HOLD
TARE
Display
Display symbol
◄
Hold
kg lb
Weighing
1. Start the scale by pressing the ON/OFF button. After a function test the last measured
weight will be displayed for 3 seconds followed by 0.00 and ◄. The scale is ready for use
and is set automatically to zero.
2. The baby can now be placed on the scale and the weight will be shown on the display in
10 g steps.
Auto hold function
Place the baby on the scale. The display will flush until the actual weight has been taken and
HOLD will be shown on the display.
To cancel the hold function press the HOLD button on the key board.
The scale will switch of after approx. 60 seconds, when not in use.
M112800-160316-Rev002-UM-de-e-es-fr-nl

Control and Display

Description
Turn on and zero setting – automatic switch off
Activates the auto hold function – to unlock press again
Activates the tare function
Description
Zero position
Auto hold
Weighting units kg or lbs

Operation

11