Add Device - Dreame D9 Manual Del Usuario

Connecting with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app *.
1. Download Mi Home/Xiaomi Home App
Scan the QR code to download and install the app. You will be directed to the
connection setup page if the app is installed already. Or search "Mi Home/
Xiaomi Home" in the App Store to download and install it.

2. Add Device

Open Mi Home / Xiaomi Home app, and tap "
top right corner " " , scan the QR code, add "Dreame Robot Vacuum D9" and
follow prompts to finish the connection.
xxxxxxx' home
No home environment info
Devices Rooms
Note:
•
Only 2.4GHz Wi-Fi is supported.
•
The version of the app might have been updated. please follow the instructions based on
the current app version.
" on the upper right. Then tap
Scanning for devices nearby...
What should I do if I cannot scan for
devices?
3. Reset Wi-Fi
Simultaneously press and hold the buttons
saying "Waiting for the network configuration". Once the Wi-Fi indicator is
slowly blinking, the Wi-Fi has been successfully reset.
Note: When your phone does not connect to the robot successfully, reset the Wi-Fi
and add the device again.
and until you hear a voice
Wi-Fi Indicator
• Blinking slowly: To be
connected
• Blinking quickly:
Connecting
• On: Wi-Fi connected
9