Skoda LBB 000 001 Instrucciones De Montaje página 15

NOS_NA_LYZE.fm Page 15 Wednesday, November 21, 2001 7:34 AM
- replace the roof rack covers and lock the lock -detail-.
- 6 -
- tighten the clamping screws (D).
Fasten the rack to the vehicle roof rack's second
bearer profile in the same manner.
Assembly onto the closed roof rack bearer profile
(Skoda Fabia, Octavia)
- 7 -
- assembly directly onto the bearer profile - only used
if there is sufficient room between the vehicle's roof
and the rack.
- slide the distance washer (B) onto the tightening ear (E)
and tighten the screw (D or F).
- for the front section of the lower arm bracket - two
tightening ears - screw (F) - length 20 mm.
- for the rear section of the lower arm bracket - two
tightening ears - screw (D) - length 35 mm.
- thread the assembly through the holes in the lower arm
bracket -arrows-.
- 8 -
- assembly with a tolerance of 25 mm from the bearer
profile - only used if there is sufficient room between
the vehicle's roof and the rack.
- thread the tightening ears (E) with the screws (D or F)
through the holes in the lower arm bracket -arrows-.
- for the front section of the lower arm bracket - two
tightening ears - screw (F) - length 20 mm.
- for the rear section of the lower arm bracket - two
tightening ears - screw (D) - length 35 mm.
- slide the distance washers (B) -detail- onto the tighten-
ing ears from underneath.
- 9 -
- line up the prepared assembly with the roof rack bearer
profile.
- 10 -
- press the tightening ear onto the roof rack bearer profile
by hand and click the lower flexible section of the tighten-
ing ear into the opening in its solid section -arrow-.
Black process 45.0° 141.0 LPI