Tabla De Contenido; The Iu.. Weighing Platforms - Minebea Intec IUXS4 Serie Instrucciones De Instalación Y Operación

Contents
2 General View of the Equipment
3 The IU... Weighing Platforms
4 Specifications
4 Accessories (Options)
4 Dimensions (Scale Drawings)
6 Declarations of Conformity
14 Documents for Hazardous Areas
The following symbols are used in these instructions:
§ indicates required steps
$ indicates steps required only under certain conditions
> describes what happens after you have performed
a particular step
- indicates an item in a list
! indicates a hazard

The IU.. Weighing Platforms

Key to model designations:
IU S 4
S =
Stainless
steel
Number of
load cells
3000 NI -LCE
Weighing Dimensions
capacity in kg
300 600 1500
NI
1200 + 840 + 76
Improper use or handling can result in damage and/or injury.
The pallet scale may be installed and operated by qualified personnel
only. Make sure you observe the warning and safety information
in its entirety during installation and operation, as well as while
performing maintenance and repair work on the equipment. The
standards, regulations, occupational safety requirements and envi-
ronmental protection laws valid in your country must be observed.
In particular, the conditions described under Item 17 of the KEMA
EC type-examination certificate, "Special Conditions for Safe Use,"
must be observed. It is important that all personnel using the
equipment understand this information, and have access to the rel-
evant documents at all times. Furthermore, the warning and safety
information supplied with any electrical equipment connected, such
as peripheral devices, must be observed as well. These warnings and
safety precautions may have to be supplemented by the equipment
operator. All operating personnel must be informed of any additions
to these instructions. Make sure the equipment is accessible at all
times.
Note instructions:
Minebea Intec Pallet Scale/Flat-bed Scale
for Use in Hazardous Areas (98648-012-69)
Resolution, not verifiable:
Resolution, verifiable:
Stainless steel versions:
§ Weighing capacities from
300 kg to 3000 kg
- 1 size: Euro-pallet
- 4 weighing capacities
- 4 models
3000
- 3000 e, 2 +3000 e
depending on model, Class III;
15,000 d, 30,000 d
- Material/surface finishing: AISI type
304 or
316 Ti stainless steel,
bead-blasted or electropolished
- IP67/IP68 rating
- Stainless steel load cells
- Customized versions possible
Operating Instructions IUXS4
15,000 d = L
30,000 d = I
3000 e = LCE
2 +3000 e = NCE
3