Dimplex CEL50 Manual Del Propietário página 10

Fireplace Installation
Figure 3
Media Tray screws (2)
Front Panel
Front Panel tabs (2)
Figure 4
Electrical box
Screw
CAUTION: Partially reflective
glass is not tempered. Do not
bump or drop the partially
reflective glass to avoid breakage
and personal injury.
• Remove partially reflective
glass from fireplace.
2. Remove six Phillips screws
that fasten the media tray
and two screws that
fasten the front panel tabs
(Figure 3). Carefully remove
both components.
10
Figure 5
Junction
Box screw
Figure 6
Junction Box screws (3)
3. Remove one Phillips screw to
release the electrical box cover
in the bottom, right corner of
the fireplace (Figure 4).
4. Carefully remove the electrical
box cover from the fireplace
as wires are fed through the
strain reliefs on the cover and
are connected within.
Wires to
controls
Wire connectors
www.dimplex.com