Important Instructions - Dimplex CEL50 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT INSTRUCTIONS

When using electrical appliances,
basic precautions should always
be followed to reduce the risk of
fire, electric shock, and injury to
persons, including the following:
① Read all instructions before
using this electric fireplace.
② This fireplace is hot when in
use. To avoid burns, do not let
bare skin touch hot surfaces.
The surface around the heater
outlet becomes hot during heater
operation.
DANGER: High temperatures
may be generated under certain
abnormal conditions. Do not
partially or fully cover or obstruct
the front of this heater.
Extreme caution is necessary
when any heater is used by or
near children or invalids and
whenever the unit is left operating
and
unattended.
Young children should be
supervised to ensure that they do
not play with the
⑤ The appliance is not intended
for use by young children
or infirmed persons without
supervision.
⑥ Do no operate any heater
after it malfunctions. Disconnect
4
appliance.
power at service panel and have
heater inspected by a reputable
electrician before reusing.
⑦ If the supply cord is damaged,
it must be replaced by the
manufacturer, or its service
agent, or a qualified person in
order to avoid a hazard. Contact
Technical Service for obtaining a
replacement cord at
1-888-346-7539.
⑧ Do not use outdoors.
Never locate fireplace where
it may fall into a bathtub or other
water container.
⑩ Do not locate the heater
immediately below a fixed
socket-outlet.
⑪ To disconnect the fireplace,
turn the controls off, and turn off
power to heater circuit at main
disconnect panel.
⑫ Do not insert or allow foreign
objects to enter any ventilation
or exhaust opening as this may
cause an electric shock or fire, or
damage to the heater.
⑬ To prevent a possible fire, do
not block air intakes or exhaust in
any manner.
⑭ A heater has hot and arcing or
sparking parts inside. Do not use
www.dimplex.com

Publicidad

Tabla de contenido
loading

Tabla de contenido