Siemens SITRANS LR200 HART Guía Para La Puesta En Marcha Rápida página 15

Key
Decimal point
Negative value
CLEAR value
TOGGLE between Units and % on parameter value
End PROGRAM session and enable RUN mode
Update echo quality parameters
Parameter scroll-up
Parameter scroll-down
DISPLAY opens parameter fields
ENTER the displayed value
Security: (P000: Lock)
Value
Value stored in P069
other
* Factory setting for P069 is 1954: after a new value is entered and accepted, it becomes the
default setting.
Activating SITRANS LR200
Power up the instrument. SITRANS LR200 starts in RUN mode.
Notes:
• Keep infrared devices such as laptops, cell phones, and PDAs, away from SITRANS
LR200 to prevent inadvertent operation.
• The following instructions apply when using the Hand Programmer.
• Do not use the Hand Programmer at the same time as SIMATIC PDM, or erratic
operation may result.
• Press PROGRAM
PROGRAM
• You do not need to key in initial zeros when entering a parameter number: for
example, for P005, key in 5.
Page EN-14 SITRANS LR200 (HART) – QUICK START MANUAL
Programming Mode
* Lock off: programming permitted
Lock activated: no changes permitted
then DISPLAY
to return to RUN mode.
Description
to access PROGRAM mode, and press
7ML19985QL83